André Paul

Scientist and project manager R & D at the Business Unit FAME

Working Areas

  • Application and IT architectures
  • Mobile Device Management 
  • Platforms and technologies for mobile applications 
  • Mobile Application and Service Development 
  • Architecture and Integration of Cloud Solutions 
  • Analysis and evaluation of IT infrastructures 
  • Evaluation of mobile and cloud technologies

Curriculum Vitae

André Paul has been working at the Fraunhofer Institute for Open Communication Systems (FOKUS) since 2008. He has extensive knowledge and experience in the areas of architecture, requirements engineering and modelling of frameworks and architectures for the mobile Internet and distributed systems. As an IT consultant, André was involved in various Internet standardization activities. In addition, André worked as an Enterprise Architect on a number of projects dealing with the future development of web and mobile platforms as well as over-the-top (OTT) communication services. In addition, André analyses existing IT infrastructures as an enterprise architect and makes result-oriented change proposals. He also has extensive experience in the field of agile project management and has sound knowledge in the areas of analysis, architecture and implementation of IT systems, infrastructures and software.


Fraunhofer publication list
Hahn, T.; Tafi, E.; Paul, A.; Salvia, R.; Falabella, P.; Zibek, S.:
Current state of chitin purification and chitosan production from insects
In: Journal of chemical technology and biotechnology : JCTB, Vol.95 (2020), No.11, pp.2775-2795
Benkö, T.; Sgourakis, G.; Molmenti, E.P.; Peitgen, H.O.; Paul, A.; Nadalin, S.; Schroeder, T.; Radtke, A.:
Portal supply and venous drainage of the caudate lobe in the healthy human liver. Virtual three-dimensional computed tomography volume study
In: World journal of surgery, Vol.41 (2017), No.3, pp.817-824
Paul, A.; Brune, K.:
Klebprozesse fachgerecht umsetzen
In: Adhäsion. Kleben und Dichten, Vol.2016 (2016), No.6, pp.16-17
Despang, H.G.; Weder, A.; Pietzsch, M.; Lindner, O.; Heinig, A.; Rentsch, W.; Paul, A.; Fischer, W.-J.:
A modular system for capacitive ecg-acquisition
In: Biomedizinische Technik, Vol.58 (2013), Supplement 1
Paul, André; Steglich, Stephan:
Virtualizing devices
In: Bertin, Emmanuel (Editor) et al.: Evolution of telecommunication services: The convergence of telecom and internet: Technologies and ecosystems. Berlin: Springer, 2013. (Lecture Notes in Computer Science 7768), pp. 182-202
Lasak, M.; Paul, A.:
Enabling cross-device media experience
(European Interactive TV Conference (EuroITV) <10, 2012, Berlin>)
In: Arbanowski, S. (Editor) et al.: EuroITV 2012, Bridging People, Places and Platforms. Adjunct proceedings: 10th European Interactive TV Conference, Berlin, July 4-6, 2012. Berlin: Fraunhofer FOKUS, 2012, pp. 25-26
Lyle, J.; Faily, S.; Fléchais, I.; Paul, A.; Göker, A.; Myrhaug, H.; Desruelle, H.; Martin, A.:
On the design and development of webinos: A distributed mobile application middleware
(International Conference on Distributed Applications and Interoperable Systems (DAIS) <12, 2012, Stockholm>)
In: Göschka, K.M. et al.: Distributed applications and interoperable systems. 12th IFIP WG 6.1 international conference, DAIS 2012: Stockholm, Sweden, June 13 - 16, 2012; proceedings. Berlin: Springer, 2012. (Lecture Notes in Computer Science 7272), pp. 140-147
Faily, Shamal; Lyle, John; Paul, André; Atzeni, Andrea; Blomme, Dieter; Desruelle, Heiko; Bangalore, Krishna:
Requirements sensemaking using concept maps
(International Conference on Human-Centered Software Engineering (HCSE) <4, 2012, Toulouse>)
In: Winckler, Marco (Editor): Human-centered software engineering. 4th international conference, HCSE 2012: Toulouse, France, October 29 - 31, 2012; proceedings. Berlin: Springer, 2012. (Lecture Notes in Computer Science 7623), pp. 217-232
Neugebauer, Reimund; Werner, M.; Paul, A.; Schieck, F.:
Media based press hardening of tubes-opportunities and challenges
(International Conference on Tube Hydroforming (TUBEHYDRO) <5, 2011, Noboribetsu>)
In: Manabe, K.-i.: Tube Hydroforming Technology: TUBEHYDRO2011; July, 24-27, 2011, Noboribetsu. Noboribetsu, 2011, pp. 100-107
Neugebauer, Reimund; Schieck, F.; Paul, A.; Albert, A.:
Presshärten in wirkmedienbasierten Umformprozessen
Hannover: EFB, 2011
(EFB-Forschungsbericht 331)
ISBN 978-3-86776-368-4
Neugebauer, Reimund; Paul, A.; Demuth, R.; Schieck, F.:
Presshärten von Rohren und Profilen mittels Innenhochdruck-Umformung
(Europäische Forschungsgesellschaft für Blechverarbeitung (Kolloquium) <31, 2011, Bad Boll>)
In: Europäische Forschungsgesellschaft für Blechverarbeitung e.V. -EFB-: Hochfeste und hybride Materialien - Schnelle Umform- und Fügeverfahren: 29. März 2011 und 30. März 2011, Bad Boll. Hannover: EFB, 2011. (EFB-Tagungsband T32), pp. 297-308
Meusel, J.; Knoll, G.; Tuzcu, S.; Neugebauer, Reimund; Schieck, F.; Gentzen, J.; Paul, A.; Müller, T.:
Entwicklung von Leichtbaunockenwellen durch alternatives Herstellungsverfahren
(Fachtagung Ventiltrieb und Zylinderkopf <4, 2010, Würzburg>)
In: VDI-Gesellschaft Werkstofftechnik: Ventiltrieb und Zylinderkopf 2010. 4. VDI-Fachtagung: Würzburg, 22. und 23. November 2010. Düsseldorf: VDI-Verlag, 2010. (VDI-Berichte 2115), pp. 25-36
Schieck, F.; Paul, A.; Pröhl, M.:
Forming technologies in automotive industry by aplying lightweight materials
(International Conference about Recent Trends in Structural Materials <1, 2010, Pilsen>)
In: Recent Trends in Structural Materials: 25.-26.11.2010, Pilsen; COMAT 2010. Pilsen, 2010, pp. 54-59
Schieck, F.; Paul, A.:
Höchste Festigkeiten bei IHU-Pressgehärteten Hohlprofilen erzielt
In: Blechnet, (2010), No.5, pp.48-49
Paul, André; Jacob, Carsten; Pfeffer, Heiko; Steglich, Stephan:
Observation-based trust management for services in mobile networks
In: Yan, Zheng (Editor): Trust modeling and management in digital environments: From social concept to system development. Hershey: Information Science Reference, 2010. (Premier reference source), pp. 309-331
Neugebauer, Reimund; Schieck, F.; Werner, M.; Paul, A.:
Presshärten im wirkmedienbasierten Umformprozess
(International Conference on Advanced Metal Forming Processes in Automotive Industry (AutoMetForm) <2, 2010, Freiberg>)
In: Kawalla, R.: 2nd International Conference on Advanced Metal Forming Processes in Automotive Industry, AutoMetForm 2010: In Verbindung mit 17. Sächsische Fachtagung Umformtechnik SFU 2010 Neue Werkstoffe für Komponenten des Fahrzeugbaus, 24. bis 26. November 2010, Freiberg. Freiberg, 2010, pp. 213-224
Neugebauer, Reimund; Schieck, F.; Paul, A.:
Presshärten von Hohlprofilen mittels Innenhochdruck-Umformung
In: Blechnet, (2010), No.2, pp.34-35
Albert, A.; Paul, A.; Pröhl, M.; Demuth, R.:
Prozessregelung beim Hot-Metal-Gasforming - Berührungslose Temperaturmessung ermöglicht Blick ins geschlossene Werkzeug
In: VDI-Z integrierte Produktion, Vol.152 (2010), No.10, pp.44-46
Schieck, F.; Paul, A.; Gentzen, J.; Meusel, J.; Reichelt, R.:
Verfahren und Vorrichtung zur Herstellung eines hohlen Bauteils und ein hohes Bauteil
Paul, A.:
Entwicklung eines Werkzeugkonzeptes zur Fertigung monolithischer Nockenwellen auf Basis des Innenhochdruck-Umformens
Chemnitz, TU, Dipl.-Arb., 2008
Radtke, A.; Bockhorn, M.; Schroeder, T.; Lang, H.; Paul, A.; Nadalin, S.; Saner, F.; Schenk, A.; Broelsch, C.E.; Malago, M.:
Computer-gestützte Operationsplanung bei Leberlebendspenden
In: Zentralblatt für Chirurgie, Vol.131 (2006), No.1, pp.69-74
Vaz, F.; Carvalho, S.; Rebouta, L.; Silva, M.Z.; Paul, A.; Schneider, D.:
Young's modulus of (Ti,Si )N films by surface acoustic waves and indentation techniques
In: Thin solid films, Vol.408 (2002), No.1-2, pp.160-168